<tt id="fnfaa"><small id="fnfaa"></small></tt>
    <b id="fnfaa"></b>

    1. <tt id="fnfaa"></tt>

          1. <tt id="fnfaa"></tt>
        1. <b id="fnfaa"></b>
          咨詢熱線
          0751-8173609

          新型圓錐破碎機 New Type Cone Crusher

          產品中心 > 新型圓錐破碎機 New Type Cone Crusher

          新型圓錐破碎機 New Type Cone Crusher

          新型圓錐式破碎機:
            新型圓錐式破碎機,是通過電動機的旋轉運動,經皮帶輪或聯軸器、傳動軸、偏心套的傳動,使破碎壁繞一固定點作旋擺運動,從而使破碎圓錐的破碎壁時而靠近又時而離開固裝在調整套上的扎臼壁表面,使礦石在破碎腔內不斷受到沖擊,擠壓和彎曲作用而實現礦石的破碎。
            該機具有破碎力巨大、效率高、運作成本低、間隙調整方便和產品粒度均勻等優點,適用于中等和中等以上硬度、進料粒度≤300mm、出料粒度≤65mm石料的破碎。破碎腔型式由礦石用途決定,標準型運用于中碎;中型適用于中細碎;短頭型適用于細碎(具體進出料粒度要根據石料硬度并通過選擇機型來確定)。
            新型圓錐式破碎機采用多缸液壓清腔系統,降低操作勞動強度。采用液壓蝶簧缸及機械雙鎖緊方式,使鎖緊更加可靠。每種規格的腔型多,能更好滿足用戶的不同需求。采用可補償式潤滑脂密封,最大限度避免粉塵對潤滑油的污染,使整機各零部件工作更加可靠,延長使用壽命。采用多組彈簧結構的安全保險系統,可使鐵塊等不可破碎物通過破碎腔而不危害破碎機,使用更加安全可靠。

            New Type Cone Crusher :
            New type cone crusher works in this way: The electromotor of the cone crusher drives the mantle to make periodic swing movement around  a fixed point through the pulley ,   coupling,  transmission  shaft  and eccentric  sleeve ;  and consequently the surface of the mantle approaches and leaves the surface of the concave fixed on the adjusting sleeve  now and then. So that the stones are continuously impacted , squeezed , bent and finally crushed inside the crushing  cavity. 
             The machine has the following advantages: huge crushing force, high  production  efficiency, low operational cost ,convenient to adjust the space between the mantle and the concave as well as  uniform  product sizes. It is suitable for crushing  stones with   medium or over medium hardness  and with feeding sizes of no more than 300 mm and discharging  sizes of  no more than 65 mm. The type of the crushing cavity can be decided by the stone crushing requirements . The standard type is applied to medium  crushing; the medium type is applied to medium  or fine crushing;the short head type is applied to fine crushing(however, the specific feeding and discharging sizes  should be decided by the  stone hardness and by choosing crusher models .).
            The labor strength of workers has been reduced by adopting a multi-cylinder hydraulic  chamber clearing system. Locking  becomes  more reliable with two ways of locking, namely hydraulic butterfly spring cylinder locking and mechanic locking. Various  types of crushing cavity can meet the users'  different  requirements. Dust pollution to the lubricating oil   has been  avoided maximally  by adopting compensable grease  sealing, so that    all parts of the crusher can operate more reliably and serve for  longer  lives. The safety system consisting of  multi-group springs allows unbreakable matters such as  iron blocks go through the crushing cavity without damage to the crusher, resulting  to  safer and  more reliable operation .

           

          技術參數 Technical  parameters

           


          型號規格
          Type

          腔型
          Cavity type

          破碎錐直徑
          Mantle
          diameter

          進料粒度
          Feed
          size

          排料范圍
          Discharge
          range

          生產能力
          Capacity

          電機功率
          Electromotor
          speed

          重量
          Weight

          外型尺寸
          Exterior
          Dimensions

           
          Remarks

          (mm)

          (mm)

          (mm)

          (t/h)

          (kw)

          (t)

          長寬高(m)
          L×W×H (m)

          PSGB-1620

          標準細型
          Standard fine type

          1676

          ≤178

          16-38

          181-327

          220

          43.3

          3.94×2.95×3.77

          配電機、啟動柜
          Motor and starter cabinet configured

          PSGB-1624

          標準中型
          Standard
          medium
          type

          ≤205

          22-51

          258-417

          PSGB-1626

          標準粗型
          Standard
          crude type

          ≤228

          25-64

          299-635

          PSGB-1636

          標準特粗型
          Standard
          Specially
          crude type

          ≤313

          38-64

          431-630

          PSGD-1607

          短頭細型
          Fine short head type

          ≤60

          5-13

          90-209

          43.9

          PSGD-1608

          短頭中型
          Medium
          short head type

          ≤76

          6-19

          136-281

          PSGD-1613

          短頭粗型
          Crude short head type

          ≤113

          10-25

          190-336

          PSGD-1614

          短頭特粗型
          Specially crude short head type

          13-25

          253-336

          PSGB-1313

          標準細型
          Standard fine type

          1295

          ≤115

          13-31

          109-181

          160

          22.5

          2.98×1.87×3.16

          配電機、啟動柜
          Motor and starter cabinet configured

          PSGB-1321

          標準中型
          Standard medium type

          ≤178

          16-38

          132-253

          PSGB-1324

          標準粗型
          Standard
          crude type

          ≤205

          19-51

          172-349

          PSGB-1325

          標準特粗型
          Standard
          Specially
          crude type

          ≤220

          25-51

          236-358

          PSGD-1306

          短頭細型
          Fine short head type

          ≤54

          3-16

          36-163

          22.6

          PSGD-1308

          短頭中型
          Medium
          short head type

          ≤76

          6-16

          82-163

          PSGD-1310

          短頭粗型
          Crude short head type

          ≤89

          8-25

          109-227

          PSGD-1313

          短頭特粗型
          Specially crude short head type

          ≤113

          16-25

          209-236

          PSGB-0910

          標準細型
          Standard fine type

          914

          ≤85

          9-22

          45-91

          75

          9.9

          2.66×1.64×2.24

          配電機、啟動柜
          Motor and starter cabinet configured

          PSGB-0917

          標準粗型
          Standard
          crude type

          ≤150

          13-38

          59-163

          PSGB-0918

          標準特粗型
          Standard
          Specially
          crude type

          ≤150

          25-38

          118-163

          PSGD-0904

          短頭細型
          Fine short head type

          ≤35

          3-13

          27-90

          10.6

          PSGD-0906

          短頭中型
          Medium
          short head type

          ≤65

          3-16

          27-100

          PSGD-0907

          短頭粗型
          Crude short head type

          ≤85

          6-19

          59-129





          高清偷自拍第1页_正在播放酒店约少妇高潮_av网站太在线片多多_亚洲一级无码毛片少妇